3D DIY

3D DIY browser required：Chrome, IE edge, Safari, Firefox

You will be able to mockup a 3d kippot with this online software before making a real sample. What is the function of the software ?  When you go to the link of the online 3d kippot model, you may change kippot fabric, select panels and shape of kippot, put on your own embroidery logo, put on your own inside printings, simply to say, you will be able to personalize all the kippot elements. If you have fabric in your hand, you may mock up the kippot with take a photo of fabric.

How to use guide:

1.      You need to scan or take photo of the fabric. Put a measure above the fabric. The image should be in png or jpg format. When you are at upload fabric page, you need cut the fabric to upload. According to the measure on the image, Just cut the fabric in 11.5x11.5 cm(4.5x4.5 inches) and then upload. In this way, the size of designs on the fabric will be most close to the real kippah design size.

2.      If you want put on your own logo to embroidery, you may also upload your own image. It is better you make the image in png file and the background of image blank.

3.      For inside printings, you may select to print inside on a label or print inside on lining. You may also upload an image to print, or put in the letters you want to print.

4.      When you finish all the selections, you may save or email the 3d mockup model. If you select send email, you need to put in email address (can put in several emails, separate by comma), the 3d model link will be sent to the emails. You may review the 3d model by the link in the email. Or scan the barcode with you smart phone to review.

5.      The software are only for mock up, it will help you to see the kippot before making a real sample, the 3d mockup model will have some difference from the real sample. Contact us if you have any questions when use the software: david@davidkippot.com and we will appreciate it if you can give us more suggestions.